DELIVERY CHARGES - Spend more than $75 & get free delivery...Otherwise $12.95 FREE same day delivery to Ipswich (conditions apply)



Hokus Pokus Decor Weave - Giselle

Regular price $29.95

Tax included. Shipping calculated at checkout.
  • Sheet Size:              80cm x 60cm (31.5″ x 23.6″)
  • No of Pieces:            2
  • Package Size:          31.5cm x 25cm

Instructions for Application Hokus Pokus new “Décor-Weave” designs will inspire you to upcycle your old, previously loved furniture from drab to fab! Hokus Pokus Décor-Weave designs are highly detailed expressions of art which can be applied to natural wood, painted furniture or a surface of your choice.

Requirements for applying a Hokus Pokus Décor-Weave:

1.) an already painted and perpared piece of furniture/project which is sanded smooth.

2.) a Décor-Weave Design

3.) paint brush

4.) brayer

5.) water-based sealer

6.) 400 grit sand paper

7.) clean water

8.) clean cloth

9.) and a Flatiron

……..optional extra a glass of wine.

With the iron on a cool setting, gently iron the back of your Décor-Weave design to remove initial fold lines. The prepared furniture piece: wipe down with a wet cloth to remove all the dust. It is vitally important to remove all excess dust before applying any Hokus Pokus Décor-Weave to your project. Sharp pieces of wood dust, no matter how small, can spoil the surface and texture of your Décor-Weave project. All painted surfaces must be 100% dry to avoid the Hokus Pokus Décor-Weave from lifting or creating air bubbles. Always plan beforehand where you are going to place your Hokus Pokus Décor-Weave and cut to size, if needed. Applying the Décor-Weave: Apply a base coat of a good quality polyurethane water-based sealer, while still wet place the Hokus Pokus Décor-Weave in the desired place, ensure all air bubbles are removed by rolling with a brayer. Wait about 30min then apply a 1st coat of sealer over the Hokus Pokus Décor-Weave, wait until 100% dry then apply a 2nd coat and 3rd coat, ensure the surface is completely dry as per manufacturer’s instructions – don’t rush this phase. Once 100% dried and cured, gently sand the whole design with 400 grit sandpaper to a smooth texture. Clean with a wet cloth.